Not only spherical plain bearings but also all types of rod ends belong to the standard product range of WSW.
Rod ends are units that consist of a housing and a spherical plain bearing. They are available with right hand male or female thread (for left-hand thread please contact WSW). For the standard mounted bearings please look on the page of the different rod end types. It is also possible to assemble different bearings (e.g. with seals or maintenance-free ones). Please compare the outer diameter and the width of the outer ring to find out which bearing will fit.
WSW can supply various types of rod ends, both maintenance-free and requiring maintenance. In case you need a stainless steel rod end please contact us.
Furthermore, the rod ends are also available with a special coating in order to withstand the special requirements of the offshore industry.
SA..C
DIN ISO: 12240-4
Form: M
hardchrome/ PTFE composite material
maintenance free
Dimensions: (5-80) mm
Temperatures: -50°C up to +150°C
- maintenance free rod ends with male thread
- Outer ring of carbon steel, pressed around the inner ring with sliding surface of PTFE-composite material
- Inner ring of bearing steel, hardened, sliding surface treated with chromium pl
Comparsion No.: SA..C, GAR..UK, TFE..MKB, TFE..T, SM..C, EA..D, FE..U, EA..D, SA..C, GAR..UK, GAR..UK, EM.., IEA..W
Features:
The inner rings are composed of hardened bearing steel with a hardchrome-plated sliding surface. The outer rings are composed of steel with PTFE-composite material which is pressed around the inner ring.
SA..E
DIN ISO: 12240-4
Form: M
Steel/ Steel
maintenance required
Dimensions: (5-12) mm
Temperatures: -60°C up to +150°C
- Rod ends with male thread requiring maintenance
- Bearings of series GE..E are firmly seated and located in the housing
- housing zinc-coated
- GE..E (5-12): Lubrication not possible
Comparsion No.: SA..E, GAR..DO, TFE..MK, SD..ES, EA, FE.., EA.., IEA..
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SA..ES
DIN ISO: 12240-4
Form: M
Steel/ Steel
maintenance required
Dimensions: (15-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with male thread requiring maintenance
- Bearings of series GE..ES are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SA..ES, GAR..DO, TFE..MK, SD..ES, EA, FE..D, EA.., IEA..
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SA..ES-2RS
DIN ISO: 12240-4
Form: M
Steel/ Steel
maintenance required
Dimensions: (15-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with male thread requiring maintenance
- Bearings of series GE..ES-2RS are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SAA..ES-2RS, GAR..DO-2RS, TFE..MK-2RS, SD..ES-2RS, EA..-2RS, FE..D-2RS, EA..-2RS, IEA..-2RS
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SA..ET-2RS
DIN ISO: 12240-4
Form: M
hardchrome/ PTFE- fabric
maintenance free
Dimensions: mm
Temperatures: -30°C up to +130°C
- maintenance free rod ends with male thread
- Outer ring of bearing steel, fractured, hardened and phosphated, with lip seals on both sides, with sliding surface of PTFE-fabric
- Inner ring of bearing steel, hardened, sliding surface
Comparsion No.: SAA..TE-2RS, GAR..UK-2RS, TFE..MKB-2RS/, TFE..T-2RS, SM..C-2RS, EA..D-2RS, FE..U-2RS, EA..D-2RS, SA..C-2RS, GAR..UK-2RS, GAR..UK-2RS, IEA..W-2RS
Features:
The outer rings are composed of hardened bearing steel with firmly glueed PTFE-fabric. The inner rings are composed of a hardchrome-plated sliding surface.
SABP..S
DIN ISO: 12240-4
Form: M
steel/ bronze
maintenance required
Dimensions: (5-30) mm
Temperatures:
- Rod ends with male or female thread requiring maintenance
- Bearings are firmly seated and located in the housing
- Outer ring of bronze liner
- Inner ring of bearing steel, spherical surface chromium plated
- Lubrication possible via lubrication hole or grease nipple
- Housing zinc-coated
Comparsion No.: SABP..S, SAKAC..M, GAKR..PB, TFE..PB, ST..PB, GA.., SMC.., GA.., POS.., TSM.., JAM.., IKA..
Features:
SAK..C
DIN ISO: 12240-4
Form: M
steel/ PTFE
maintenance free
Dimensions: (5-30) mm
Temperatures:
- Maintenance free rod ends with male or female thread
- Bearings are firmly seated and located in the housing
- Outer ring of bronze, sliding surface of PTFE-composite material
- Inner ring of bearing steel, spherical surface chromium plated
- Housing zinc-coated
- Material: C 45 zinc-coated
Comparsion No.: SAK..C, SAKB..F, GAKR..PW, TFE..PW, SZ..PW, POS..EC, TSM..C, BEM.., FBM.., IKA..W
Features:
SAS..ES
DIN ISO:
Form: M
steel/ steel
maintenance required
Dimensions: (40-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
- GE..E (5-12): Lubrication not possible
Comparsion No.: SAS..ES, SA..ES, TFE..MK MAG., SDM..ES, FEM..D
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SAS..ES-2RS
DIN ISO:
Form: M
steel/ steel
maintenance required
Dimensions: (40-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES-2RS are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SAS..ES-2RS, SA..ES-2RS, TFE..MK-2RS MAG., SDM..ES-2RS, FEM..D-2RS
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..C
DIN ISO: 12240-4
Form: F
hardchrome/ PTFE composite material
maintenance free
Dimensions: (5-80) mm
Temperatures: -50°C up to +150°C
- Maintenance free rod ends with male or female thread
- Bearings of series GE··C or GE··ET–2RS are firmly seated and located in the housing
- Housing zinc-coated
Comparsion No.: SI..C, GIR..UK, TFI..FKB, SL..C, EI..D, FI.., EI..D, SI..C, GIR..UK, EF.., IEI..W
Features:
The inner rings are composed of hardened bearing steel with a hardchrome-plated sliding surface. The outer rings are composed of steel with PTFE-composite material which is pressed around the inner ring.
SI..E
DIN ISO: 12240-4
Form: F
steel/ steel
maintenance required
Dimensions: (6-12) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..E are firmly seated and located in the housing
- housing zinc-coated
- GE..E (4-12): Lubrication not possible
Comparsion No.: SI..E, SI..E, GIR..DO, TFI..FK, SC..ES, EI.., FI.., EI.., SI..E, CGK.., GIR..DO, IEI..
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..ES
DIN ISO: 12240-4
Form: F
steel/ steel
maintenance required
Dimensions: (15-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SI..ES, SI..ES, GIR..DO, TFI..FK, SC..ES, EI.., FI..D, EI.., SI..ES, CGK.., GIR..DO, IEI..
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..ES-2RS
DIN ISO: 12240-4
Form: F
steel/ steel
maintenance required
Dimensions: (15-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES-2RS are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SI..ES-2RS, SIA..ES-2RS, GIR..DO-2RS, TFI..FK-2RS, SC..ES-2RS, EI..-2RS, FI..D-2RS, GK..LS, EI..-2RS, SI..ES-2RS, CGK.., GIR..DO-2RS, IEI..-2RS
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..ET-2RS
DIN ISO: 12240-4
Form: F
hardchrome/ PTFE- fabric
maintenance free
Dimensions: (5-80) mm
Temperatures: -30°C up to +130°C
- maintenance free rod ends with male thread
- Outer ring of bearing steel, fractured, hardened and phosphated, with lip seals on both sides, with sliding surface of PTFE-fabric
- Inner ring of bearing steel, hardened, sliding surface
Comparsion No.: SIA..TE-2RS, GIR..UK-2RS, TFI..FKB-2RS/, TFI..T-2RS, SL..C-2RS, EI..D-2RS, FI..U-2RS, GK..L, EI..D-2RS, SI..C-2RS, GIR..UK-2RS, IEI..W-2RS
Features:
The outer rings are composed of hardened bearing steel with firmly glueed PTFE-fabric. The inner rings are composed of a hardchrome-plated sliding surface.
SIBP..S
DIN ISO: 12240-4
Form: F
steel/ bronze
maintenance required
Dimensions: (5-30) mm
Temperatures:
- Rod ends with male or female thread requiring maintenance
- Bearings are firmly seated and located in the housing
- Outer ring of bronze liner
- Inner ring of bearing steel, spherical surface chromium plated
- Lubrication possible via lubrication hole or grease nipple
- Housing zinc-coated
Comparsion No.: SIBP..S, SIKAC..M, GIKR..PB, SP..PB, GI.., GI.., PHS.., TSF.., JAF.., IKI.., KI..A
Features:
SIS..ES
DIN ISO:
Form: F
steel/ steel
maintenance required
Dimensions: (40-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SIS..ES, SI..ES, TFI..FK MAG., SCM..ES, FIM..D
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SIS..ES-2RS
DIN ISO:
Form: F
steel/ steel
maintenance required
Dimensions: (40-80) mm
Temperatures: -60°C up to +150°C
- Rod ends with female thread requiring maintenance
- Bearings of series GE..ES-2RS are firmly seated and located in the housing
- housing zinc-coated
- Lubrication possible via lubrication hole or grease nipple
Comparsion No.: SIS..ES-2RS, SI..ES-2RS, TFI..FK-2RS MAG., SCM..ES-2RS, FIM..D-2RS
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
WAPR..CE
DIN ISO: 8132
Form: steel/ steel
maintenance required
Dimensions: (12-320) mm
Temperatures:
- Hydraulic rod end for clamping requiring maintenance
- Bearings of series GEEW··ES with cylindrical broadened inner ring are firmly seated and located in the housing, fixed with retaining rings
- Lubrication possible via grease nipple in the housing
- Material: 20-80mm: C 45, from 90mm: spheroidal cast iron
Comparsion No.: SIGEW..ES, SIQG..ES, GIHN-K..LO, TAPR..CE, SN..CE, FPR..CE, PR..CE, GK..CKS, GK..CK-S, SIGEW..ES, CGKD.., DGIHN-K..LO, IHGK..CE
Features:
WAPR..N
DIN ISO:
Form: steel/ steel
maintenance required
Dimensions: (20-120) mm
Temperatures: -60°C up to +150°C
- Hydraulic rod end for screwing on requiring maintenance
- Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings
- Lubrication possible via grease nipple in the housing
- Material: 20-80mm C 45, 90-120mm spheroidal cast iron
Comparsion No.: SIRD..ES, GIHR..DO, TAPR..N, SN..N, FPR..N, PR..N, CGA.., DGIHR..DO, IHGK..N
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
WAPR..S
DIN ISO: 8133
Form: steel/ steel
maintenance required
Dimensions: (12-100) mm
Temperatures:
- Hydraulic rod end for clamping requiring maintenance
- Bearings of series GE··ES are firmly seated and located in the housing
- Lubrication possible via grease nipple in the housing
- Material: C45
Comparsion No.: SIQ..E, SIJ..ES, GIHO-K..DO, TAPR..S, SN..S, FPR..S, PR..S, CGKA.., DGIHO-K..D, IHGK..S
Features:
WAPR..U
DIN ISO:
Form: steel/ steel
maintenance required
Dimensions: (20-120) mm
Temperatures:
- Hydraulic rod end for clamping and screwing on requiring maintenance
- Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings
- Lubrication possible via grease nipple in the housing
- Material: 20-80mm: C 45, 90-120mm: spheroidal cast iron
Comparsion No.: SIR..ES, SIR ..ES, GIHR-K..DO, TAPR..U, SN..U, FPR..U, PR..U, GK..NKS, GK..NK-S, SIR..ES, CGAK.., DGIHR-K..DO, IHGK..U
Features:
WGAS..
DIN ISO:
Form: steel/ steel
maintenance required
Dimensions: (25-160) mm
Temperatures:
- Hydraulic rod end, heavy duty design, for clamping, requiring maintenance
- Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings
- Lubrication possible via grease nipple in the housing
- Material: 20-50 mm: C45, 60-160 mm: spheroidal cast iron
Comparsion No.: SIA..ES, TAPR.. U GAS, SN..GAS, FMA..D, MA..D, GK..SKS, CGAS..
Features:
WS..C
DIN ISO: 12240-4
Form: S
steel/ steel
maintenance required
Dimensions: (10-80) mm
Temperatures: -60°C up to +150°C
- Hydraulic rod end for welding requiring maintenance
- Bearings of series GE··E or GE··ES are firmly seated and located in the housing
- With locating pin and welding chamfer
- Lubrication possible via lubrication hole or grease nipple in the housing
- Material: S 355
- Size (10-12): no lubrication possible
- Größe (15-17): possible via lubrication hole
Comparsion No.: SK..ES, SC..ES, GK..DO, TS..C, SN..A, FS..C, S..C, FS..C, T.A.C. .. (TS..C), SK..E, DGK..DO, IHAGK..C
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
WS..CE-N
DIN ISO:
Form: steel/ steel
maintenance required
Dimensions: (20-110) mm
Temperatures: -60°C up to +150°C
- Hydraulic rod end for welding requiring maintenance
- Bearings of series GEEW··ES are firmly seated and located in the housing, fixed with retaining ring
- With welding chamfer
- Lubrication possible via grease nipple in the housing
- Material: S 355
Comparsion No.: GN..LO, TS..CE-N, SN..L
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
WS..N
DIN ISO:
Form: steel/ steel
maintenance required
Dimensions: (15-120) mm
Temperatures: -60°C up to +150°C
- Hydraulic rod end for welding requiring maintenance
- Bearings of series GE··E or GE··ES are firmly seated and located in the housing
- With welding chamfer
- Lubrication possible via grease nipple in the housing
- Material: S 355
Comparsion No.: SF..ES, SCF..ES, GF..DO, TS..N, SN..P, FS..N, S..N, FS..N, T.P.N. .. (TS..N), SF..ES, DGF..DO, IHAGK..N
Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.