Rod ends

Not only spherical plain bearings but also all types of rod ends belong to the standard product range of WSW.


Rod ends are units that consist of a housing and a spherical plain bearing. They are available with right hand male or female thread (for left-hand thread please contact WSW). For the standard mounted bearings please look on the page of the different rod end types. It is also possible to assemble different bearings (e.g. with seals or maintenance-free ones). Please compare the outer diameter and the width of the outer ring to find out which bearing will fit.

WSW can supply various types of rod ends, both maintenance-free and requiring maintenance. In case you need a stainless steel rod end please contact us.

Furthermore, the rod ends are also available with a special coating in order to withstand the special requirements of the offshore industry.

Type Maintenance Characteristics Informations Comparsion No.: Search criteria
SI..E
DIN ISO: 12240-4
Form: F
steel/ steel
requiring maintenance

Dimensions:
(6-12) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..E are firmly seated and located in the housing

  • housing zinc-coated

  • GE..E (4-12): Lubrication not possible

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..E, SI..E, GIR..DO, TFI..FK, SC..ES, EI.., FI.., EI.., SI..E, CGK.., GIR..DO, IEI..
SI..ES
DIN ISO: 12240-4
Form: F
steel/ steel
requiring maintenance

Dimensions:
(15-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..ES, SI..ES, GIR..DO, TFI..FK, SC..ES, EI.., FI..D, EI.., SI..ES, CGK.., GIR..DO, IEI..
SI..ES-2RS
DIN ISO: 12240-4
Form: F
steel/ steel
requiring maintenance

Dimensions:
(15-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES-2RS are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SI..ES-2RS, SIA..ES-2RS, GIR..DO-2RS, TFI..FK-2RS, SC..ES-2RS, EI..-2RS, FI..D-2RS, GK..LS, EI..-2RS, SI..ES-2RS, CGK.., GIR..DO-2RS, IEI..-2RS
SIS..ES
DIN ISO:
Form: F
steel/ steel
requiring maintenance

Dimensions:
(40-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SIS..ES, SI..ES, TFI..FK MAG., SCM..ES, FIM..D
SIS..ES-2RS
DIN ISO:
Form: F
steel/ steel
requiring maintenance

Dimensions:
(40-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES-2RS are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SIS..ES-2RS, SI..ES-2RS, TFI..FK-2RS MAG., SCM..ES-2RS, FIM..D-2RS
SIBP..S
DIN ISO: 12240-4
Form: F
steel/ bronze
requiring maintenance

Dimensions:
(5-30) mm
Temperatures:

  • Rod ends with male or female thread requiring maintenance

  • Bearings are firmly seated and located in the housing

  • Outer ring of bronze liner

  • Inner ring of bearing steel, spherical surface chromium plated

  • Lubrication possible via lubrication hole or grease nipple

  • Housing zinc-coated

Features:

SIBP..S, SIKAC..M, GIKR..PB, SP..PB, GI.., GI.., PHS.., TSF.., JAF.., IKI.., KI..A
SA..E
DIN ISO: 12240-4
Form: M
steel/ steel
requiring maintenance

Dimensions:
(5-12) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with male thread requiring maintenance

  • Bearings of series GE..E are firmly seated and located in the housing

  • housing zinc-coated

  • GE..E (5-12): Lubrication not possible

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SA..E, GAR..DO, TFE..MK, SD..ES, EA, FE.., EA.., IEA..
SA..ES
DIN ISO: 12240-4
Form: M
steel/ steel
requiring maintenance

Dimensions:
(15-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with male thread requiring maintenance

  • Bearings of series GE..ES are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SA..ES, GAR..DO, TFE..MK, SD..ES, EA, FE..D, EA.., IEA..
SA..ES-2RS
DIN ISO: 12240-4
Form: M
steel/ steel
requiring maintenance

Dimensions:
(15-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with male thread requiring maintenance

  • Bearings of series GE..ES-2RS are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SAA..ES-2RS, GAR..DO-2RS, TFE..MK-2RS, SD..ES-2RS, EA..-2RS, FE..D-2RS, EA..-2RS, IEA..-2RS
SAS..ES
DIN ISO:
Form: M
steel/ steel
requiring maintenance

Dimensions:
(40-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

  • GE..E (5-12): Lubrication not possible

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SAS..ES, SA..ES, TFE..MK MAG., SDM..ES, FEM..D
SAS..ES-2RS
DIN ISO:
Form: M
steel/ steel
requiring maintenance

Dimensions:
(40-80) mm
Temperatures:
-60°C up to +150°C

  • Rod ends with female thread requiring maintenance

  • Bearings of series GE..ES-2RS are firmly seated and located in the housing

  • housing zinc-coated

  • Lubrication possible via lubrication hole or grease nipple

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SAS..ES-2RS, SA..ES-2RS, TFE..MK-2RS MAG., SDM..ES-2RS, FEM..D-2RS
SABP..S
DIN ISO: 12240-4
Form: M
steel/ bronze
requiring maintenance

Dimensions:
(5-30) mm
Temperatures:

  • Rod ends with male or female thread requiring maintenance

  • Bearings are firmly seated and located in the housing

  • Outer ring of bronze liner

  • Inner ring of bearing steel, spherical surface chromium plated

  • Lubrication possible via lubrication hole or grease nipple

  • Housing zinc-coated

Features:

SABP..S, SAKAC..M, GAKR..PB, TFE..PB, ST..PB, GA.., SMC.., GA.., POS.., TSM.., JAM.., IKA..
WS..C
DIN ISO: 12240-4
Form: S
steel/ steel
requiring maintenance

Dimensions:
(10-80) mm
Temperatures:
-60°C up to +150°C

  • Hydraulic rod end for welding requiring maintenance

  • Bearings of series GE··E or GE··ES are firmly seated and located in the housing

  • With locating pin and welding chamfer

  • Lubrication possible via lubrication hole or grease nipple in the housing

  • Material: S 355

  • Size (10-12): no lubrication possible

  • Größe (15-17): possible via lubrication hole

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SK..ES, SC..ES, GK..DO, TS..C, SN..A, FS..C, S..C, FS..C, T.A.C. .. (TS..C), SK..E, DGK..DO, IHAGK..C
WS..N
DIN ISO:
Form:
steel/ steel
requiring maintenance

Dimensions:
(15-120) mm
Temperatures:
-60°C up to +150°C

  • Hydraulic rod end for welding requiring maintenance

  • Bearings of series GE··E or GE··ES are firmly seated and located in the housing

  • With welding chamfer

  • Lubrication possible via grease nipple in the housing

  • Material: S 355

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SF..ES, SCF..ES, GF..DO, TS..N, SN..P, FS..N, S..N, FS..N, T.P.N. .. (TS..N), SF..ES, DGF..DO, IHAGK..N
WS..CE-N
DIN ISO:
Form:
steel/ steel
requiring maintenance

Dimensions:
(20-110) mm
Temperatures:
-60°C up to +150°C

  • Hydraulic rod end for welding requiring maintenance

  • Bearings of series GEEW··ES are firmly seated and located in the housing, fixed with retaining ring

  • With welding chamfer

  • Lubrication possible via grease nipple in the housing

  • Material: S 355

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
GN..LO, TS..CE-N, SN..L
WAPR..N
DIN ISO:
Form:
steel/ steel
requiring maintenance

Dimensions:
(20-120) mm
Temperatures:
-60°C up to +150°C

  • Hydraulic rod end for screwing on requiring maintenance

  • Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings

  • Lubrication possible via grease nipple in the housing

  • Material: 20-80mm C 45, 90-120mm spheroidal cast iron

Features:
The inner and outer rings are composed of hardned and phosphated bearing steel and the spherical sliding surfaces are treated with running-in lubricant.
SIRD..ES, GIHR..DO, TAPR..N, SN..N, FPR..N, PR..N, CGA.., DGIHR..DO, IHGK..N
WAPR..U
DIN ISO:
Form:
steel/ steel
requiring maintenance

Dimensions:
(20-120) mm
Temperatures:

  • Hydraulic rod end for clamping and screwing on requiring maintenance

  • Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings

  • Lubrication possible via grease nipple in the housing

  • Material: 20-80mm: C 45, 90-120mm: spheroidal cast iron

Features:

SIR..ES, SIR ..ES, GIHR-K..DO, TAPR..U, SN..U, FPR..U, PR..U, GK..NKS, GK..NK-S, SIR..ES, CGAK.., DGIHR-K..DO, IHGK..U
WAPR..CE
DIN ISO: 8132
Form:

requiring maintenance

Dimensions:
(12-320) mm
Temperatures:

  • Hydraulic rod end for clamping requiring maintenance

  • Bearings of series GEEW··ES with cylindrical broadened inner ring are firmly seated and located in the housing, fixed with retaining rings

  • Lubrication possible via grease nipple in the housing

  • Material: 20-80mm: C 45, from 90mm: spheroidal cast iron

Features:

SIGEW..ES, SIQG..ES, GIHN-K..LO, TAPR..CE, SN..CE, FPR..CE, PR..CE, GK..CKS, GK..CK-S, SIGEW..ES, CGKD.., DGIHN-K..LO, IHGK..CE
WAPR..S
DIN ISO: 8133
Form:
steel/ steel
requiring maintenance

Dimensions:
(12-100) mm
Temperatures:

  • Hydraulic rod end for clamping requiring maintenance

  • Bearings of series GE··ES are firmly seated and located in the housing

  • Lubrication possible via grease nipple in the housing

  • Material: C45

Features:

SIQ..E, SIJ..ES, GIHO-K..DO, TAPR..S, SN..S, FPR..S, PR..S, CGKA.., DGIHO-K..D, IHGK..S
WGAS..
DIN ISO:
Form:
steel/ steel
requiring maintenance

Dimensions:
(25-160) mm
Temperatures:

  • Hydraulic rod end, heavy duty design, for clamping, requiring maintenance

  • Bearings of series GE··ES are firmly seated and located in the housing, fixed with retaining rings

  • Lubrication possible via grease nipple in the housing

  • Material: 20-50 mm: C45, 60-160 mm: spheroidal cast iron

Features:

SIA..ES, TAPR.. U GAS, SN..GAS, FMA..D, MA..D, GK..SKS, CGAS..
Copyright 2024 WSW Wälzlager - Wolfgang Streich GmbH & Co. KG